Brigade YECBN360-300 – High Definition Backeye360 System

Stock Code: YECBN360-300

Brigade YECBN360-300 – High Definition Backeye®360 System

How it works

Backeye®360 is an intelligent camera monitor system designed to assist low-speed manoeuvring by providing the driver with a complete ‘bird’s-eye’ surround view of the vehicle in real time.

360° technology works with four ultra wide-angle cameras, each covering one full side of the vehicle with a viewing angle of over 180°.

High-mounted on the front, rear and sides, the calibrated cameras capture all of the surrounding area including the blind spots of the vehicle or machine.

The four live images are simultaneously sent to an electronic control unit (ECU) where they are instantly processed, combined, blended and stitched. The distortion from the wide-angle camera lens is also corrected so that a clear, real-time view of all around the vehicle is provided to the driver in a single image on the monitor.

Backeye®360 will work on most vehicles and machines, large or small. Our expert team of Applications Engineers can advise on installation to everything from a van to a 200 tonne dump truck, including rigid and articulated trucks and buses, loading shovels, excavators, lift trucks, straddle carriers and many others.

  • 1 x ECU
  • 4 x BN360-1000C cameras
  • 1 x Video output cable to
    connect to SELECT range monitor
  • 1 x set-up/view-select button
  • 1 x ECU power harness
  • 1 x ECU interface/video input harness
  • 720p HD 360˚ image
  • 15 different view modes (10 x landscape & 5 x portrait configurations)
    -Front & rear crossing traffic
    -Customisable vehicle position
  • 2 pre-defined configuration groups
  • Configure & customise set up via PC calibration software
  • Left, right, reverse & speed signal trigger
  • Configurable on-screen parking markers
  • Customisable overlay guidelines per camera view
  • 2 x video outputs
  • 1/4" CMOS sensor
  • Video output: AHD 1.0 and NTSC
  • IP69K cameras
  • 12-24Vdc
  • Size (WxHxD) ECU
    178 x 113 x 26mm
  • Size (WxHxD) Camera
    61 x 50 x 42mm
  • 5 year warranty
  • Power consumption: 15 Watts
  • Current: 1.22 Amps
    Durability & Standards
  • Mechanical vibration: 8.5G
  • Mechanical shock: 51G
  • Operating temperature:
    -30 to +75C˚
  • IP30 ECU
  • CE marked
  • E-Marked: UNECE R10 compliant
  • FCC Approved
  • IC Approved
  • ISO 20653:2006
  • ISO 13766-1:2018
  • Calibration kit is required for installation.
  • Monitor and camera extension cable not included
  • Individual cameras not recordable on MDR - monitor out only

We have placed cookies on your device to help make this website better.

Your Basket