Brigade YECBN360-200 – High Definition Backeye®360 System with Remote Control

Stock Code: YECBN360-200

Brigade YECBN360-200 – High Definition Backeye®360 System

How it works

Backeye®360 is an intelligent camera monitor system designed to assist low-speed manoeuvring by providing the driver with a complete ‘bird’s-eye’ surround view of the vehicle in real time.

360° technology works with four ultra wide-angle cameras, each covering one full side of the vehicle with a viewing angle of over 180°.

High-mounted on the front, rear and sides, the calibrated cameras capture all of the surrounding area including the blind spots of the vehicle or machine.

The four live images are simultaneously sent to an electronic control unit (ECU) where they are instantly processed, combined, blended and stitched. The distortion from the wide-angle camera lens is also corrected so that a clear, real-time view of all around the vehicle is provided to the driver in a single image on the monitor.

Backeye®360 will work on most vehicles and machines, large or small. Our expert team of Applications Engineers can advise on installation to everything from a van to a 200 tonne dump truck, including rigid and articulated trucks and buses, loading shovels, excavators, lift trucks, straddle carriers and many others.

  • 1 x ECU
  • 4 x BN360-100C cameras
  • 1 x Video output cable to
    connect to SELECT range monitor
  • 1 x set-up/view-select button
  • IR receiver & remote control
  • 1 x ECU power harness
  • 1 x ECU interface harness
  • 360˚ image
  • 19 different view modes (max 10 views per chosen configuration group)
    - Landscape or portrait configurations
    - Front & rear crossing-traffic
    - Left & right lane changing assist
    - Customisable vehicle position
  • 4 pre-defined configuration groups
  • Configure & customise set up via
    monitor and IR remote control
  • Left, right, reverse & speed signal triggers
  • Configurable on-screen parking markers
  • 3 x video outputs
  • Ultra-wide viewing angle cameras
    (HxV) 185˚ x142˚
  • 1/3.7" CMOS sensor
  • TV system: NTSC or PAL via switch on
    ECU(cameras NTSC only)
  • IP69K cameras
  • 12-24Vdc
  • Size (WxHxD) ECU
    174 x 101 x 30mm
  • Size (WxHxD) Camera
    61 x 46 x 36mm
  • 5 year warranty
  • Power consumption: 8 Watts
  • Current: 0.65 Amps
    Durability & Standards
  • Mechanical vibration: 8.5G
  • Mechanical shock: 51G
  • Operating temperature:
    -30 to +75C˚
  • IP30 ECU
  • CE marked
  • E-Marked: UNECE R10 compliant
  • FCC Approved
  • IC Approved
  • ISO 20653:2006
  • ISO 13766:2018
  • EN 13309:2010
  • *Camera monitor system R46 approved
  • Calibration kit is required for installation.
  • Monitor and camera extension cable not included

We have placed cookies on your device to help make this website better.

Your Basket